iPhone Problems

The iPhone X introduced exclusive features to Apple’s smartphone lineup in 2017. And, it also came with new technical issues specific to the redesign. Many faced call dropping problems after updating this device to iOS 15. Though, Apple claimed to fix this software bug from iPhone X.

But, the users still experience issues when receiving calls. Like any smartphone, iPhone X can generate issues over time. Sometimes, it might stop responding or can be stuck on Apple Logo. Try to restart this Apple product in such instances.

If that doesn’t work, remove the iPhone X’s battery. Wait for at least 2-3 minutes and reinsert it. It will resolve this glitch from this device. Most iPhone X issues can be solved without external help. However, you may need professional support for complicated errors.

Now, let’s see what the other iPhone X issues are and how to troubleshoot them:

Face ID Not Working

The most common complaint about the iPhone X relates to its Face ID. It sometimes stops working and prevents users from unlocking their devices. In most cases, this issue occurs when there is dirt or dust inside the iPhone camera. An outdated iOS can also trigger this problem.

Is there a fingerprint stain on the TrueDepth camera? It can be a reason behind this face detection issue. Moreover, there’s an array of sensors and cameras on the iPhone X’s “notch”. And, the face ID won’t work if dust particles clog these units.

Wipe this device’s surface with a microfibre cloth to prevent this issue. But, don’t exert too much pressure while cleaning; it can damage the camera. Still having problems with the iPhone X’s Face ID feature? Open the phone settings and tap on “Face ID & Passcode”. Opt for “Reset Face ID” and set it up again.

The iPhone is Automatically Taking Screenshots

Apple didn’t integrate a home button into iPhone X. Unlike the other phones, and it can’t take screenshots using the Home and Power buttons. Instead, it uses the Volume Up and Side button keys to capture the entire screen.

Sometimes, this device can take screenshots even when not holding these buttons. Usually, this occurs when you keep the iPhone X inside a bag or pocket. A slight pressure on these buttons can enable this feature. And, there is no way to change the key shortcut. But, you can still fix this issue from the iPhone X.

Get a phone case with a recessed side button. It will prevent the device from automatically taking screenshots. There are different quality iPhone X covers available in the market. Choose the one that fits with the phone design. Besides, you should turn off the iPhone when you aren’t using it.

Screen Glitches

The iPhone X is Apple’s first-ever phone with an OLED display. They used this screen type in the Apple Watch and MacBook Pro. But, the screen technology is more advanced in this iPhone model. It is also water and dust resistant. However, it still causes certain screen problems.

Some noticed a slight change in colour hue when moving the display. Moreover, you might see green lines on the screen while using power-intensive apps. Screen burn is another problem that users experience with the iPhone X.

It is a display issue which discolours certain areas on the touch screen. Apple recommends a few easy fixes for these screen errors. First, ensure the “Auto-Brightness” feature is enabled. Then, head to iPhone X’s “Settings” and double-tap on “General”.

Toggle on “Accessibility” and choose “Display Accommodations”. Choose from either “Invert Colours” or “Colour Filters” and check if the issue persists.

Are there any Other Solutions to Fix iPhone X’s Screen Issues?

Reduce the Auto-lock time to fix this iPhone X problem. Access the device settings and select “Display & Brightness” afterwards. Search for “Auto-Lock”, toggle it on and set the time to 30 seconds.

Restart the iPhone, and no lines will appear on the OLED display. Moreover, you should always use the device at a minimum brightness level. High screen brightness can result in discolouration.

Thus, adjust the device brightness from the Control Center. Try to watch any movies and check if the issue is resolved. Are you still facing the same problem? Then, you need to opt for an instant screen replacement.

Phone Call and Touch Screen Delay issues

These two issues occurred on iOS 11 and earlier versions. The first one was related to iPhone X’s incoming calls. Resolving this problem might be a little tricky. The screen lights up, and the ringtone plays, but the answer/decline call prompt doesn’t appear.

Meanwhile, the touch screen issue affected the users in cold climates. The iPhone X’s screen stops responding after a sudden drop in temperature. Apple fixed both these issues in the iOS 12 update. Thus, ensure the iPhone X is running the latest iOS version.

Go to the iPhone X’s “Settings” and tap on “General”. Scroll down to the next tab and select “Software Update”. Completing the software update may take at least 10-15 minutes. Don’t turn off the iPhone X and check there is sufficient charge. Restart the phone after that and use it without glitches.

Speakers Crackling at High Volumes

iPhone X uses stereo speakers to produce loud sounds. However, these speakers can cause issues when increasing the volume. Usually, it occurs for configuring incorrect audio settings. You may have chosen an audio volume which doesn’t support the iPhone X.

Adjust the volume to fix this iPhone X sound glitch.

What are the Other Critical iPhone X Issues?

Performance issues can occur in the iPhone X due to consistent use. And, a soft reset can solve this issue immediately. Press the Volume Up button for 2 seconds and release it. Now, it’s time to hold the iPhone X’s Volume down button.

Release this button after a few seconds and hold the Side button until the Apple Logo appears. Additionally, you can update iOS to speed up the phone’s performance.

Is the iPhone X taking an ample amount of time to charge? Check its battery, power adapter and lightning cable. And, replace these iPhone units if there is wear and tear.

The “iPhone is Disabled” error message appears for entering wrong passcodes several times. And, you can’t unlock the device if you don’t write the correct password within 1 minute. But, there is nothing to fret over. Because you can use the iPhone 5 by connecting it to iTunes, this iOS app allows you to fix these problems easily.

iTunes will remove the existing iPhone 5’s passcode. And, you can set a new, easy-to-remember password after that. However, you need to re-sync iTunes to iPhone 5. Otherwise, unlocking the iOS device will be pretty challenging. Connect the iPhone 5 to the Mac laptop using a USB cable.

Open iTunes and choose the correct iPhone model. Tap on “Summary” when the iTunes window pops up on the iPhone 5’s screen. And, choose “Sync with this device over Wi-Fi” and opt for “Apply”. You can now restore or update the iPhone 5 using this Apple software.

Reasons for the “iPhone is Disabled. Connect to iTunes” Error?

iPhone 5 displays this error message for 10 incorrect attempts. Turn off the device by pressing the Sleep/Wake button. And, move the “Power Off” slider from left to right. Press the “Power” button and enter the correct password when the lock screen appears. Sometimes, it helps to unlock the disabled iPhone 5.

Moreover, Apple includes effective built-in security measures in iPhone 5. And, it disables the device to prevent hackers from accessing it. Thus, change the passcode if you are getting this message. It will secure sensitive iPhone data from unauthorised users.

How to Stop the iPhone 5 from Getting Disabled?

There are many ways to stop getting this “iPhone is disabled. Connect to iTunes” error. Try to be extremely careful when inputting the passcode. Additionally, you need to choose a complex iPhone 5 password. Combine letters and numbers to make it hard to decode. Or, the iPhone owners can add characters to the lock password.

Is someone trying to unlock your iPhone 5? Then, access the “Settings” window and double-tap on “Touch ID & Passcode”. Enter the current iPhone 5 passcode in the blank field. Scroll down to the page and move the “Erase Data” toggle from left to right. It will wipe out the data when hackers unlock the device after 10 failed attempts. However, ensure to store the required data beforehand.

How to Troubleshoot “iPhone is Disabled. Connect to iTunes”?

You can get into the iPhone 5 if you see the “Connect to iTunes” message. You can also retrieve the important data from iTunes to iPhone. However, certain factors need to be considered before connecting the device to iTunes. You will need either a Mac or Windows PC.

Additionally, iPhone owners should have a USB cable. Ensure the iPhone or Mac supports a USB A cable. Because, if the Mac has only a USB-C port and the iPhone uses an older USB A cable, you can’t use iTunes. Thus, check the port connection before plugging in the cable.

Did the iPhone 5 match all these requirements? Then, follow these steps to know how to connect the disabled iPhone 5 to iTunes.

Enable the Recovery Mode

Recovery mode allows iPhone users to fix this login issue. Turn off the iPhone by pressing the “Power” key and the “Home” button afterwards. Connect a USB cable to the iPhone 5 while holding this button. And, release it when the Apple logo appears on the iOS device’s screen. It indicates that the iPhone 5 is in Recovery mode.

Locate the iPhone Model from the Mac/Windows PC

This step might vary depending on the type of OS the PC uses. Did you connect the iPhone 5 with a device that uses macOS Catalina? Then, open the Finder menu and head towards “Locations”. Here, you will see the iPhone’s model number. Select “iPhone 5” to connect it to iTunes.

Moreover, you need to double-tap on iTunes if the PC uses macOS Mojave or older. This OS supports only the latest iTunes version. Did the iPhone use the iTunes 12 version? Then, tap on the “iPhone” icon from the iTunes window. And, move to the “iPhone” tab if iTunes 11 is installed on the device.

The “iPhone” option will be in the sidebar in iTunes 10. Tap on the iPhone 5 from the wireless device list and select “OK” when prompted. Moreover, the steps to choosing the iPhone model are similar to Windows PCs. Once you choose the iOS device name, proceed to the next step.

Opt for the “Restore” Option

Choose “Restore” after selecting the iPad from the Mac or Windows computer. And, the iPhone 5 will update the device’s software within a few minutes. However, it may take more than 15 minutes when the Wi-Fi connection is slow. Try to switch to a stable wireless network and reconnect the iPhone 5 to the PC.

Repeat the above steps and follow the on-screen instructions when prompted. Enter the passcode and click “Ok” to remove the existing data, including the password. The iPhone 5 will restart automatically when it wipes out all data.

Set a New Password

Now, it is time to generate a secure iPhone 5 passcode. However, you will have to restore the data from the iTunes backup before that. It may take 10-15 minutes to complete. Access the “Settings” window after that and select “General”.

Scroll down to the “General” tab and choose “Passcode Lock”. Enable “Turn Passcode On” and enter the passcode you want to use. Re-enter the new password on the next screen and tap on “Save”. Reboot the iPhone 5 and unlock the device without hassle.

Fail to Connect the Disabled iPhone to iTunes? Here’s How to Fix It

Fixing a disabled iPhone can be difficult at times. Some iPhone 5 users face problems when connecting their devices to iTunes. Usually, this occurs when using an outdated iTunes. A faulty USB cable can also prevent you from using this iOS app. Thus, replace the USB cable to resolve this connectivity issue. Or, you can contact an iPhone repair expert to get more troubleshooting tips.

iPhones come with optimal security measures to protect your device’s data. And, the passcode is surely one of the most crucial ones among them. Your iPhone locks the device for a specific time after each wrong passcode input. And, you would find your device locked, then you must have entered the wrong passcode 10 times. Your iPhone would display the message “iPhone is disabled. Connect to iTunes” in such situations.

As you can tell from the message, you must use iTunes to unlock the device in such cases. However, you can use iCloud for the task, too, as we shall see. Follow the information given below to deal with the iPhone is disabled connect to iTunes iPhone 6 problem.

Fix the iPhone 6 Disabled Error Using iTunes

You need to connect your iPhone to a computer that has iTunes to proceed with this method. So, you should download and install iTunes on your Mac or PC first if you have not already.

Then, you can proceed to create a backup using the computer and then restore the phone. This will remove all the system settings from your iPhone 6, including the passcode. You can then set up a new passcode on it.

Here is how to use iTunes to fix the phone disabled errors on your iPhone 6:

Install iTunes (On PC)

Are you using a PC? Then, you need to install iTunes on it first. You must skip to the next step if you are using a Mac. Open the Microsoft Store to get iTunes on your Windows device. Then, download the app and complete its setup procedure by launching it. You can then proceed with the following steps to complete the iPhone 6 restoration.

Connect Your iPhone to the Computer

You must connect your iPhone 6 to the computer you have iTunes. And, you must use a USB connection for this task. So, use a USB adapter to connect your iPhone to your computer.

You can simply use the cable that comes with your iPhone charger. Open iTunes after setting up the connection and proceed to backup and restore your iPhone 6.

Find and Restore your iPhone on Your Computer

On the latest iTunes, and you should find the iPhone icon in the top-left corner. Click on this icon and proceed with a backup to save the important files on your iPhone. Then, select Restore among the options for your iPhone once the backup is complete. This will restore all the default settings on your iPhone. You can then download the backed up files whenever you are ready.

Set Up Your iPhone

iPhone does not have a passcode by default, as you know. So, you need to set one on it again after gaining back access to it. Go through the setup process again and choose the optimal security settings. Then, you can connect the iPhone to the computer again to download the iTunes backup file.

Fix iPhone 6 Disabled Using iCloud

Do you prefer to use a different method than the aforementioned one? Then, you can try erasing your iPhone using your iCloud. You can do this from any device in a few simple steps. And, it is a viable alternative when your iPhone is unable to connect to iTunes. However, you must keep in mind that this will delete all the data that you have not backed up. Also, your iPhone 6 must have an internet connection if you want to proceed with this method.

Follow these steps to unlock your iPhone 6 using iCloud:

Sign In to Your iCloud Account

Open any browser and go to the official iCloud website. You can then log in to your iCloud account if you have one. Also, you need an iCloud account to proceed with this method. Enter the credentials on the website to access your account and proceed with the next step.

Locate Your iPhone and Erase it

Click on the Find iPhone option after accessing your iCloud account. Have you set up Find My iPhone on your device? If yes, then you can find it anytime using this method as long as it has an internet connection. Otherwise, you cannot proceed with this method until you set up Find My iPhone. And, you should reach out to Apple support for a solution in that case.

Click on Erase iPhone after selecting your iPhone 6. This will remove the passcode apart from all other system data from the device. You can then access it without any passcode as you did while using it the first time.

Access Your iPhone 6 and Configure It

You can access your iPhone without using any passcode after you erase its data. Set up the device once again and configure it as per your preferences.

Have you backed up your data recently on iCloud or iTunes? Then, you must download the backup to get most of your important files back. If you have not backed up your data, you lose them forever after the iPhone restores.

Fix iPhone 6 Disabled Using the Find My App

Do you have another Apple device where you have installed the Find My app? Then, you can simply use this app to erase your device instead of visiting iCloud.com. Also, download this app on your second Apple device if you have not done that already. Then, you must launch the app to proceed with erasing your iPhone 6 data.

Click on the ‘Help a friend’ option on the Me tab and sign in to your iCloud account. Select your disabled iPhone under the Devices section and click on the ‘Erase this Device’ option. Then, access your iPhone and configure it all over again. Also, download the latest backup you have created.

Contact the Support Team

Are you unable to unlock your disabled iPhone 6 for some reason? Then, you must consider reaching out to the support team. They should provide you with an effective solution within a reasonably short time. Also, make sure to avoid this issue further on your iPhone.

The inability to make phone calls or receive them is one of the most annoying issues you might come across. And, it seems to be common across all devices regardless of the brand or model.

You might encounter a similar problem on your iPhone as well. You would see a message saying that there is no service in such situations. This problem might have various causes and hence several possible solutions.

You can usually fix the ‘no service’ problem all by yourself without professional help. Read to know how to fix no service on iPhone within simple steps. Then, try out the solution that would be appropriate in your case.

7 Ways to Resolve iPhone Service Issues

The problem you have encountered might have something to do with the SIM card. But, that is not always the case after all. Problems with some other components of your phone might also cause service issues.

In some cases, you would also need to ask the service provider to fix the problem from their end. Here are some steps that would help you resolve the issue in most cases: 

• Switch to Flight Mode and Back to Normal Mode

This is quite an effective method to resolve various service-related issues on your iPhone. All you need to do is turn on Flight mode for half a minute. This will stop the service on your iPhone, and you must disable this mode once you are ready. You can refresh your iPhone’s service this way and resolve its problems.

But, what if enabling and disabling the flight mode does not help? In that case, you must also try restarting your cellular data for a solution. 

• Restart Cellular Data

Are you unable to use the cellular data on your iPhone? Then, you must simply restart this feature for a solution. And, that should refresh the service and fix various errors in it. Open the Settings menu on your iPhone and go to the Cellular Data section. Turn it off and wait for a minute before turning it back on.

Try to access the internet on your device once you are done. If it cannot access the service, you must try restarting the phone for an immediate solution. 

• Restart Your iPhone

Your iPhone may fail to access the service due to a temporary error. And, you can expect a solution to that by simply restarting the device. You can turn off your iPhone for a minute or perform a restart to resolve the problem. In any case, it can offer you an effective solution to the service issue.

Try to make a call after you have restarted your iPhone. Does it fail to access the service again? Then, you have some other effective solutions to try out. 

• Make Sure You are within the Coverage Area

Your iPhone might fail to access the service because it is outside the coverage area. You might be at a location where the service is not available. In that case, you need to find a place where you can access the service. The problem should not persist once you do that unless there are other causes.

Are you travelling outside the home network while facing the problem? In that case, you must enable data roaming to access the internet. As for making calls, you need not do anything other than find an area where you can receive signals.

Go to the Cellular section in your iPhone settings menu and click on Cellular Data Options. Toggle on the Data Roaming option there if you find it disabled. You should be able to access the internet on your iPhone. 

• Re-Insert the SIM Into Your Device

Does the problem persist after you have tried all the previous methods? In that case, you must take out the SIM, and then insert it back into the device. Also, make sure you have inserted it the correct way into your iPhone. A wrongly inserted SIM is yet another cause of service issues after all.

Have you failed to access the service since inserting the SIM into your iPhone? Then, you must take this step before you try any other solutions. And, if the problem persists, you should check whether the SIM is damaged. 

• Replace the SIM if it is Damaged

As mentioned earlier, a damaged SIM is one of the possible causes of service issues. And, you must check whether this applies to your case. Take out the SIM card according to the procedure for your iPhone model and check the golden part. Do you find it damaged? If yes, then you must replace the SIM for a solution.

You can also try inserting the SIM from your iPhone into another device. Then, check whether the other device can access the service. If it can, then your SIM is not faulty. 

• Reset the Network Settings

The service issues you are facing might have something to do with your network settings. Resetting these settings can fix the problem in such cases. And, you can do that in a few simple steps through your iPhone’s settings menu. Open the General section in the Settings and click on the ‘Transfer or Reset [Device]’ option. Select Reset and opt for resetting the network settings.

You can proceed with accessing the network the usual way once you are done. And, you should not face any further issues after you take this step. If you do, then it might indicate an outdated system or an issue with the carrier.

What to do if these Solutions Fail?

You have other viable options if the aforementioned solutions are ineffective. Updating your iOS system can help you fix a wide range of issues. And, it might also help you fix service issues in many cases.

So, you must give that a try if none of the aforementioned fixes was helpful. You can also restore your device to its original state for a solution. But, you must contact your service carrier before you take that step.

The situation won’t be less than a nightmare when your iPhone refuses to get charged. It seems like a ticking time bomb as the remaining charge of your iPhone will drain in a few hours. Then, your iPhone won’t remain useful as you can’t charge your iPhone. Well, numerous factors can trigger a situation where your iPhone doesn’t charge at all.

What to do if your iPhone doesn’t charge? There are pretty simple solutions that you can apply when you can’t charge your iPhone. However, the charging incompatibility might arise from a faulty adapter, dirty lightning port, defective case that can’t support Qi-wireless charging, etc. Whatever the reason is, you have to follow the instructions below to restore the charging capabilities of your iPhone.

Restart your iPhone

What to do if your iPhone doesn’t charge? Give it a restart. Restart or reboot is present in almost every list of troubleshooting errors. A quick restart might not be effective in restoring your iPhone’s lost amenity. But, trust us, restarting your iPhone might eliminate the menace that might be preventing your iPhone from getting charged.

However, you should restart your iPhone if your device has enough battery life. If the battery flags 5% or lower battery life, don’t go for a restart. It might not turn on again, and since it’s not charging, you will come across a bigger problem. The same applies to your dead iPhone. Otherwise, you can give it a try and charge your iPhone after it restarts.

Try Charging the iPhone Under Different Circumstances

Majorly, you can charge an iPhone with a lightning cable, wirelessly, or both. Verify whether your iPhone has lost all the possibilities to get charged. If you charge your iPhone wirelessly, then try plugging the lightning cable into it and see if the charging starts working.

If wired charging is possible on your iPhone, there might be issues with the case or the wireless charging. Wired charging simplifies situations, and you can get rid of the charging tantrum. On the other hand, you can try charging your iPhone by inserting its lightning cable into your computer. If your iPhone draws power from your computer, the glitch might be somewhere else.

In addition to this, your iPhone might have drained all its battery power and is currently dead now. If the iPhone shows no sign of life even after plugging it into a power supply, leave it like that for an hour. Check the device after an hour to see if the iPhone is charging or the battery is still dead.

Verify your Charging Adapter and Cable

You might have switched to a power adapter and cable after the original ones went bad. Additionally, Apple doesn’t provide a power adapter anymore with the latest smartphone purchases. And, that’s why new iPhone users must purchase power adapters, but often they are from third-party manufacturers.

Now, third-party adapters might not be compatible with your iPhone power ratings. After a while, the charging process might stop. Additionally, it might damage your iPhone’s charging components.

On a contrary note, a defective USB cable might not charge your iPhone anymore. Therefore, you should replace the charging elements if you find that your iPhone starts charging with certified accessories. Make sure that you purchase MFi-certified chargers for seamless charging. iOS prohibits charging if it detects charging from a non-MFi certified accessory.

Does the iPhone Case Support Wireless Charging?

What to do if your iPhone doesn’t charge wirelessly? Numerous iPhone users have reported that they have been struggling with wireless charging, whereas wired charging requires no hustle at all.

You might be interested in recovering wireless charging facilities as your iPhone is capable of that. And, there’s nothing wrong with that.

One thing that might play an important role in wireless charging is the iPhone’s case. You might have protected your iPhone with a sturdy case. And, the case protects the iPhone’s stunning glass back against scratches and other accidental hazards

If that case is too thick, then wireless charging might not occur. Not every iPhone case comes with Qi-wireless charging support. Hence, you have to remove the iPhone case if you’re facing an issue with wireless charging.

What to do if your iPhone doesn’t charge even after that? Ensure that you have removed all the back accessories, such as the ring holder cover or similar things, from your iPhone. After that, you should try charging it wirelessly.

Update your iOS

Battery issues are nothing new if a new iOS update hits the floor. Apple might realise the consequences soon and release another patch to reverse the side effects. Therefore, it’s important to keep your iPhone updated.

Here’s how you can check whether your iPhone has a pending iOS update:

1. Tap the Settings icon that’s on the home screen.
2. Scroll down till you locate General and tap on it.
3. Next, touch the Software Update option.
4. It will initiate a check for iOS updates.
5. If there’s any update available, install it, and your iPhone will have the latest iOS version.

Check if this solves your iPhone’s charging problem

Clean the Charging Port

What to do if your iPhone doesn’t charge even after updating the software? Have a look at the lightning port of your iPhone. The chances are that junk or a considerable amount of lint might have blocked the charging passage.

That’s why your iPhone can’t charge at all. Shut down your iPhone and insert a toothpick gently into the charging port. Be careful while bringing the debris out of the charging port. Ensure that the charging port is clean enough to keep the charging uninterrupted.

Additional Workarounds

Give your iPhone a hard reset by pressing the Power or side button and the right Volume key according to your iPhone model. In addition to this, you can try restoring your iPhone after connecting it to a computer and launching iTunes.

On the other hand, liquid damage can also ban iPhone charging. What to do if your iPhone doesn’t charge after applying these solutions? Consult with an iPhone repair specialist if the issue persists.

Suppose you are about to send an important message and the iPhone 7 turns off. You may think that this occurs due to insufficient charge. But, sometimes, the iOS device fails to turn on even when there is a 50% battery level. But, there are many ways to fix this complicated problem.

Usually, the iPhone 7 doesn’t charge or turn on due to a damaged battery. Thus, replace the battery and check if the error persists. Ensure to get a compatible and MFi certified battery. Otherwise, you won’t be able to resolve this iPhone 7 error. Moreover, the users should check the power button.

A faulty power key can prevent you from turning on the device. Press and hold it for 2-3 seconds and check if the iPhone 7 is restarting.

Still, facing the same problem in this Apple product? Then, change the unresponsive power button immediately.

Need more solutions for the “iPhone 7 died and won’t charge or turn on” error? Follow this guide.

Why is the iPhone 7 Not Charging or Turning On?

Several reasons could trigger this problem in the iPhone 7 – It could be for using a battery that is drained completely. Users can encounter this issue when there is corrupted firmware. Did you spill water on the iOS device? Then, there is a high chance that its internal parts are damaged.

Besides, you can experience this problem if the iPhone has damaged charging pins. iPhone 7 can’t charge if the lightning port has stopped working. Are you using this device for 3-4 years? Repair the faulty ports to overcome this problem. Additionally, you need to check the power adapter.

Plugin the iPhone 7 into the charger and check if the battery indicator appears. If the screen doesn’t light up, it indicates something is wrong with the charger. Or, it could occur for connecting the charger to a faulty outlet. Try to connect it to a different power outlet and check if that works.

What to do When the iPhone 7 Dies and Won’t Charge or Turn on?

iPhone 7 shows a black screen due to software glitches and hardware conflicts. Moreover, the device might get stuck on the Apple logo when trying to turn it on. Remove the battery and reinsert it after a few minutes. Press the Power key and check if the iPhone restarts. And, follow these solutions if the error persists:

Hard Reset the iPhone

A hard reset can resolve this problem for the iPhone 7 models. Though many find an iPhone reboot and hard reset similar, however, these two processes work differently. Have you hard reset an iOS device before? Then, start with pressing the “Volume Down” and “Sleep/Wake” buttons together.

Hold these buttons for at least 10-12 seconds. Release the “Volume Down” and “Sleep/Wake” buttons when the screen turns black. Besides, an Apple logo will appear on the iPhone 7 screen within seconds. This indicates that you have turned on the device successfully.

Now, it’s time to connect the charger to the iPhone 7’s port. Unlock the device and check the battery icon. The device is charging if there is a lightning bolt symbol in the battery icon. Get a new charger if the battery percentage remains the same after charging for 10 minutes.

Look for the Sign of Damage

The iPhone may not turn on or charge even after using MFi-certified chargers. Usually, this occurs when using a faulty lightning cable. Thus, check if there is any wear and tear in this iPhone 7 unit. Change the cable if you notice a frayed cord.

Though, it is hard to detect a sign of damage in the charging cable. However, you should replace it if you have been using the cable for 3-4 years. Besides, you can try to charge another iPhone to check if there is a problem with the charger.

Does the device also fail to turn on or charge? Then, use a different USB cable and power adapter to fix the issue.

Get into the Recovery Mode

Recovery mode allows the iPhone 7 users to troubleshoot the software issues. And, it does that by using either Finder or the iTunes app. Connect the iPhone to an iPad or a Mac laptop using a USB cable. Verify the iOS device has the latest iTunes version.

Ensure there is a stable internet connection. Otherwise, iTunes can’t detect the source of the problem. Now, it’s time to press and hold the Volume Down button. Release the button when you see a black screen with iTunes on it. It indicates iTunes has recognised the iPhone 7.

Recovery mode will then give you two options – Update and Restore. Choose “Update” to install the latest iOS version for the iPhone 7. Now, press and hold the “Power” button and it will turn on without hassle. And, the device will even start charging within a minute.

Restore the iPhone 7 with iTunes

In most cases, the iPhone might not turn on after the software update. You have to restore its default factory settings in such circumstances. But, how can you reset the iPhone 7 when it is dead? Connect the iOS device to a Windows/Mac computer using a USB cable.

Wait until the iTunes icon pops up on the screen. And, then select “Restore” from the options list. It will wipe out all the iPhone data. Thus, back up the essential files on another device to prevent data loss.

Is the resetting process taking more than 15 minutes? Disconnect the iPhone 7 from the laptop and repeat these steps.

Lastly, Enable the iPhone 7’s DFU Mode…

Get into the DFU mode if none of the solutions work. Moreover, if the Recovery mode did not fix the problem, then the issue is related to firmware. Fix the iPhone firmware error by using the DFU Mode. Connect the iPhone to a PC using a USB cable.

Hold the Sleep/Wake and Volume Down buttons together. Release the Sleep/Wake key after 10 seconds. And, release the Volume Down key when the iPhone 7 screen goes black. Choose “Restore iPhone” to update the firmware. Try to restart the device after 3-4 minutes and charge it without hurdles.

Your iPhone might fail to charge under various circumstances. And, you can try out a wide range of methods to fix that. Cleaning the charging port is one of the promising ways to fix charging issues. You must also consider doing that regularly to avoid further charging problems. However, your iPhone might still fail to charge after you clean its port.

Does cleaning the charging port prove to be an ineffective solution in your case? Then, you need not worry as there are other solutions as well. Here, we will take a look at the most effective ways to fix that. Try each of them if your iPhone won’t charge after cleaning port.

5 Alternatives to Cleaning the Port for Fixing iPhone Charging Issues

You must make sure that you have cleaned the charging port properly first. Only then should you move on to other viable solutions. After all, a dirty charging port makes all other solutions ineffective against iPhone charging problems. So, you might want to try cleaning the port again using a toothpick and a can of compressed air.

Proceed with the following solutions once you have determined cleaning the charging port is not beneficial:

Use a Certified Apple Charger

Are you using a third-party charger with your iPhone? If yes, that could be why your iPhone won’t charge after cleaning the port. Getting an Apple charger might help you resolve the issue effectively. So, you must replace the third-party charger as soon as possible in such cases. If that does not do the trick, there are some other solutions to try.

Are you using a third-party cable with an Apple charger? Then, you must replace it with an Apple cable. And, that should resolve the charging issue on your iPhone. Also, try to get the right type of cable for your iPhone charger.

What if You are Using an Apple Charger?

If you are already using an Apple charger, your charger might be damaged. And, you would have to buy a new one in that case. Try using a different charger with your iPhone first before you do that. If the other compatible charger does not work, the charging port might be an issue.

Plug the Charger into Another Socket

If your iPhone won’t charge after cleaning port, it might have something to do with the power source. So, you must check whether that is the case before trying other solutions. All you have to do is simply plug the charger into a different socket.

Do you find your iPhone charging now? Then, you need to fix the socket you were using earlier and not your phone.

Connect to the Wall Socket Directly

Are you using an indirect connection between your charger and wall socket? If yes, then you must switch to a direct one. This can often fix the charging problem you face while using an indirect connection. So, you must connect your charger directly to the power outlet every time.

Connect the Charger Properly at Both Ends

The ‘iPhone won’t charge after cleaning port’ issue might indicate a connection problem, among other issues. So, you must make sure that you have connected the charger properly at both ends.

Check whether you have plugged it in properly into the power outlet. Then, check its connection with your phone and re-insert it into the charging port if required.

Does your iPhone start charging after you take this step? If yes, you simply need to ensure a proper connection with the charger. And, that should help you avoid the charging problems further unless it has any other causes.

Hard Reset Your iPhone

Various errors in your iPhone might result in the ‘iPhone won’t charge after cleaning port’ issue. And, hard resetting your device can be an effective way to fix those errors. The steps for doing that differ depending on the iPhone model.

Proceed with one of the following methods to hard reset your iPhone based on the model:

iPhone 6s/ 6s Plus and Older

Hold the side and home buttons simultaneously until the Apple logo appears on the screen. Then, release them and check whether your iPhone is charging.

iPhone 7/ 7 Plus

Simultaneously press and hold down the Volume Down and side buttons. Wait for the Apple logo to appear on the screen and release the buttons. Then, connect your device to the charger to check on the problem.

iPhone 8 and Later

On the latest iPhones, you must press the Volume Up and Volume Down buttons one after the other first. Then, press and hold down the power button to hard reset your iPhone. This should resolve the ‘iphone won’t charge after cleaning port’ issue.

Update Your iOS System

The problem you are facing might also have to do with your system version. Are you using an outdated iOS version on your iPhone? If yes, getting an update might help you resolve the charging problem.

So, you might want to do that as soon as possible on your device. Open the Settings section of your iPhone and go to the General section. Then, click on Software Update and look for the latest available system version.

Download and install the update whenever you are ready. You must also consider turning on automatic updates if it is disabled on your device. And, that way, you would not have to update your iOS system manually every time. In any case, you might find your iPhone able to charge after updating its system.

What if these Methods do not Work?

You can usually fix the iPhone charging issue with one of the aforementioned methods. But, they are not always effective. And, you might have to reach out to a reliable iPhone repair service in such cases.

The Apple customer support team can also help you find an effective solution within a short time. But, you must try restoring your device to its factory settings before that.

Charging an iPhone can be a time-consuming task. But, what’s worse is when you connect the device to the charger and find out it’s not charged at all. It could bring a lot of conveniences, especially when you need the phone to make an urgent call. Disconnect and reconnect the charger’s cable from the iPhone to solve the problem.

Did you accidentally spill water on the iPhone? Then, there is a high chance that its charging port might be damaged. And, this is why the iPhone isn’t charging when plugged in. Fix this iPhone unit to overcome the changing difficulties. Additionally, you need to check if the charger is compatible with the iPhone.

An incompatible iPhone charger can generate this problem. Thus, always use an Apple-certified charger to avoid unwanted problems. Did you turn on the power switch where the charger is connected? The iPhone won’t charge if it is off.

Try to connect the iPhone charger to a different power outlet and check if it’s charging. Still, the iPhone not charging when plugged in? Check out the following reasons and solutions to fix it:

Why is the iPhone not Charging When Plugged in?

Several issues could trigger this charging problem in iPhones. Dust and dirt particles can accumulate inside the charging port over time. And, these contaminants can prevent the iOS device from charging. Remove the dust/dirt particles to charge the iPhone without hurdles.

Moreover, a loose charging cable can cause this issue. iPhone users can face this problem for software bugs. Besides, charging issues may occur due to a faulty lightning cable. Replace this iPhone cable immediately to resolve the issue.

Easy Fixes for iPhone not Charging When Plugged In

iPhone charges are fragile and can stop functioning if you bend them. A power adapter can last for 2-3 years. However, it depends on how you use it. Most iPhone users don’t turn off the power outlet after disconnecting the iPhone. It could overheat and damage the Apple chargers.

Ensure to disconnect the charger from the outlet every time you use it. It will increase the charger’s longevity and minimise the charging issues. Moreover, you can experience this problem while using a drained iPhone battery.

Replace it in the first place and follow these solutions if the error persists:

Clean the Lightning Port

Ensure the iPhone’s lightning port is clog-free. Always clear this port after a month or two. Otherwise, it might be packed with pocket lint. And, it can prevent the connector from establishing a stable power connection. Thus, remove the dirt and debris from the lightning port.

Don’t use any sharp object to clean the iPhone port. It can damage the port and cause critical charging issues. Instead, use a flat toothpick that has rounded tips. It is ideal for port cleaning and offers effective results. Besides, toothpicks are less likely to cause damage to the ports.

Additionally, you can use cotton to clean the ports. Twist the cotton a little bit and slightly insert it into the port. Remove the dust, dirt or debris without hassle. However, iPhone users need to be extra cautious when using this cleaning method because you can damage the charging pins by exerting excessive pressure.

What Else Needs to be Done?

Reboot the iPhone after cleaning the lightning port. Do you use an old iPhone model? Then, simultaneously press the ‘Volume Up” and “Side” buttons. Release these keys when the “Power Off” slider appears on the iPhone screen.

However, the latest iPhone users need to press the “Slide” key to get this option. You don’t need to hold the “Volume Up/Volume Down” button to get the “power off” slider. Toggle on the slider to shut down the iOS device and press the power button after a few minutes.

Release this key when the iPhone 5S or 6 shows the Apple logo. Now, connect the charger to the iPhone and charge the device with ease.

Still, getting the charging problem in the iPhone? Apply the next solution to resolve it immediately.

Verify the Charger isn’t Charging

Don’t replace the charger if the iPhone isn’t charging. Ensure it has stopped working or is damaged beforehand. And, connect the phone to the charger first. Turn on the wall outlet’s power switch and unlock the device.

Head to the “power battery” icon and check if there is a lightning bolt. If yes, there is no need to charge the iPhone’s charger. However, replace the charger if the iPhone’s battery is draining rapidly when it’s plugged in. Get a compatible charger that can work with the iPhone.

Update the latest iOS

Outdated software can prevent the iPhone from charging. Thus, install the latest iPhone software to fix the issue. But, you need to check if there is a 40% charge on the device. Otherwise, the software update process might be interrupted by an insufficient charge.

Open the iPhone’s Settings and navigate to “General”. Tap on “ Software Update” and opt for “Download and Install now”. The iOS device will complete the installation within 15-20 minutes. Restart the device after that, and check if the charging issue is still there.

Lastly, Hard Reset the iPhone…

A hard reset can solve the complicated charging issues from iPhones. But, the resetting steps may vary from one iPhone model to another. Do you use the iPhone 6S, SE, or older models? Then, hold down the Power and Home button simultaneously.

Release these keys when the iOS device displays the Apple logo. Additionally, the iPhone 7/7 Plus users need to press the power and volume buttons together. But, don’t hold these buttons for more than 2-3 seconds.

Release the iPhone 7/7 Plus buttons when the Apple logo pops up. Do you use iPhone8, X or iPhone 12 Pro? Press and release the “ Volume Up” button first. And then hold the Volume down button for a few seconds.

Press and hold the iPhone’s “Power” key and release it when the Apple logo appears on display. Connect the Apple product to the charger, and it won’t cause any further issues. Contact an iPhone expert if you fail to solve the charging issue.

Smartphones have turned into touchscreen devices a decade ago. If the touchscreen doesn’t respond to your taps or commands then it’s impossible to regulate your smartphone. As there are only a few physical buttons and they are not pretty much useful for opening apps or executing dedicated operations.

Why is my iPhone display not working? If your iPhone display stopped working and now becomes unresponsive then it’s worth the worry. A sudden glitch, corrupt software, dirty screen, etc can lead you to such an issue.

Fortunately, a few easy fixes can bring life to your iPhone display. However, they might not be useful if it’s a fatal hardware fault.

Let’s see how you can treat an iPhone whose display has gone unresponsive.

Reboot your iPhone

This sounds too obvious and it should be. Restarting your iPhone to make its display work again might sound silly. But, trust us, it won’t be. iPhones might become unresponsive or freeze due to temporary technical glitches.

And, an immediate restart can eradicate all the temporary glitches of your iPhone. Depending on your iPhone, restarting the iPhone might require the engagement of one or multiple physical buttons. For example, if you have an old iPhone that has a Home button then you have to press and hold the Power button.

Leave the Power button when the power-off slider appears on the screen. Wait for a while and then restart the device by long-pressing the Power button. On the other hand, you have to press and hold the Power and any of the Volume buttons when you acquire the latest iPhone. Slide the Power-off slider to turn off the device. After a minute or so, you can restart the device with a long press on the Power button.

If a simple restart doesn’t work on your iPhone, then you might be thinking, ‘Why is my iPhone display not working?’. Try the following methods to check if you can make your iPhone’s touchscreen display work again.

Detach Accessories if Connected through Lightning Port

This situation is rare; still, we can’t discard it. If you have plugged in any accessories to your iPhone via the lightning port, it can cause a disturbance. As a result, it can interfere with the iPhone display. And, the iPhone display can stop working.

For example, your iPhone earphones, charger, or a power bank might interrupt your display experience. If you have plugged in anything to your Phone, unplug it as soon as possible. This generally happens when the accessories are not compatible with the device. Check if the issue persists.

Update that Particular Application

Users have reported that iPhone displays can stop responding to touches when they open a specific application. A corrupt installation might trigger the situation. This might answer you ‘Why is my iPhone display not working?’ query.

Go to the App Store and make sure that you update that corresponding application. Test if the application makes the iPhone display unresponsive anymore. If that doesn’t fix the issue, you have to reinstall the app. Uninstall the app by holding the app and tapping the Remove option. Confirm the deletion and then reinstall it from the App Store.

Clean the iPhone Display

The issue can be related to the display only and not any definite application. Make sure that your iPhone’s touch screen display is clean enough to sense your taps and touches. The device uses electrical conductance to sense your touches. If the screen is dirty, the device fails to recognise whatever you command.

Therefore, you should clean up your iPhone’s display. Take a clean microfiber cloth or paper towel to remove the iPhone display’s dirt, moisture, grease, and debris. On the other hand, the wet screen doesn’t work. If you touch your iPhone with wet hands, the touches will make no sense.

Ensure that you thoroughly clean your iPhone display. After that, you should let the iPhone screen dry. Once it’s dry, you can test the responsive capacity of your iPhone. Additionally, you should take off your gloves while tapping or touching iPhone screens. Why is my iPhone display not working?- continue with the following fixes if you still face the problem.

Take off the Screen Guard

Screen guards are a must-have for any smartphone. They are the first-line defence against any unexpected physical injuries to your mobile device. However, a few screen guards can be the culprit behind the unresponsive nature of iPhones.

If your iPhone’s screen guard is too thick in breadth, it’s common for your iPhone to stop working. The thick screen guard works as a barrier between the screen’s electrical capacitance and the finger’s touch.

Remove the screen guard if possible. In addition to this, you can consider removing the iPhone’s cover. Check if your iPhone’s display starts responding to your touches and taps. If things get normal, you should go for a thinner screen guard.

Go for a Factory Reset

A factory reset is a more exquisite process than restarting an iPhone. Additionally, a factory reset brings your iPhone back to its default settings. You will lose all your installed apps except for the system default ones. Therefore, backup your iPhone before going for a factory reset. And, here’s what you need to follow to execute a factory reset on your iPhone:

1. Connect your computer to the defective iPhone.
2. Launch iTunes on your computer.
3. If it’s an iPhone 8 or later, hold both the volume buttons and the Side key. Otherwise, press and hold the Side button and the Volume button simultaneously.
4. This will detect an iPhone in recovery mode on iTunes. Click on Restore and go through the on-screen instructions.

Is the Hardware Faulty?

Why is my iPhone display not working? If your iPhone display still fails to respond to your touch, it can be a hardware disaster. Users have complained that iPhone displays have turned black and dead in some cases. Try charging the device with an alternate adapter and force restart it. Otherwise, seek expert intervention and check if your iPhone requires a screen replacement.

A system update usually enhances your device’s performance in most cases. However, many people might start facing problems after updating their iPhones. And, the device not turning on seems to be a common issue among them.

Did you fail to start your iPhone 7 Plus after a system update? There are several possible explanations for this problem. And, you might have to try out different solutions in each case.

Here, we have some effective solutions you can try if the iPhone 7 Plus won’t turn on after update.

Why does iPhone 7 Plus Fail to Turn On after Update & How to Fix it?

If the problem starts after the system update, it might indicate a software issue. However, there are other possible causes too. So, you might also need to consider other possible causes of the problem.

Here are all the possible fixes you can try to get your iPhone 7 to turn on:

Force Restart the Device

Your iPhone should restart without any issues after completing a system update. However, it might fail to do that under various circumstances. If it is a temporary error, you can expect an effective solution by force restarting the phone. And, that has fixed the iPhone 7 Plus won’t turn on after update in many cases.

Press and hold down the Power and Volume Down buttons simultaneously to force restart your iPhone 7 Plus. Then, release them once you see the Apple logo on the screen.

But, what if you do not see the logo within a few seconds? In that case, you must make sure that the device has enough power to start up.

Connect Your iPhone to the Charger

Are you unable to turn your iPhone on after the system update? Then, it might not have anything to do with the update, as mentioned earlier. It might not have enough power, and you can fix that by charging it. So, connect it to the charger and wait for a minute to check if your device starts up.

Does the ‘iPhone 7 Plus won’t turn on after update’ issue persist? Then, you might need to reset it to factory settings. But, you might want to check for other causes of the problem before that.

Consider Other Causes of the Startup Failure

Resetting the device can remove all the system data from your iPhone unless you have backed them up. You might usually prefer not to take this step right so.

Did you fail to resolve the problem with the previous methods? Then, consider the following causes of the problem and apply the appropriate solutions for them:

Faulty Battery

Smartphones might develop a faulty battery under various circumstances. And, that might explain why your iPhone 7 Plus won’t turn on after update. So, you must check whether there is an issue with the device’s battery.

You might need to approach a professional to get an effective solution if there is. The battery of the iPhone 7 Plus is not removable after all.

Faulty Charger or Charging Cable

Did you fail to turn your iPhone 7 Plus on after connecting it to the charger? Then, you must check for any issues with the charger or its cable. Replacing the charger or its cable might help you resolve the problem effectively.

Hardware Damage

Have you dropped the device while updating it? Then, that might have caused hardware damage to your iPhone. As a result, you are unable to turn it on after an update. This is yet another case where the issue has nothing to do with the new software. Also, you need to approach a reliable repair service to resolve this issue effectively.

Display Issues

Your iPhone 7 Plus won’t turn on after update if it has display issues. And, this is one of the common causes of this issue. Like the previously mentioned problems, you must approach a professional to fix this one. You should be able to start your device after you have got its display repaired.

Water Damage

You might have accidentally spilt water on your iPhone 7 Plus. In that case, you have found the cause of the problem you are facing. You can take various steps to deal with water damage on your phone all by yourself. But, you must also consider getting a professional repair service without causing too much delay.

Restore the Factory Settings on Your iPhone

Did all of the previously-mentioned methods fail to do the trick? Then, you must restore factory settings on your device. And, that should fix the ‘iPhone 7 Plus won’t turn on after update’ unless there is a hardware issue.

Proceed with the following steps to restore factory settings on your iPhone 7 Plus:

Connect Your Device to an iTunes Computer

You need to use iTunes to backup, and then restore your iPhone 7 Plus in this case. To do that, you need to install iTunes on a compatible computer. In case you are wondering, there is a Windows version of the app. Connect your iPhone 7 Plus to the computer after you have installed iTunes on the latter. You must use a USB cable for this task.

Backup Your iPhone

Select the File option for your connected iPhone on the iTunes app. Then, click on Backup Now in the Device tab after selecting Backup. Wait for the backup process to complete before you restore your iPhone.

Restore Your iPhone

Click on the Summary option for your iPhone, and then select the Restore Backup option. Then, select the backup file that you created. Wait for the process to complete, and then make sure you can turn on your iPhone.

Contact Apple Support

Does the ‘iPhone 7 Plus won’t start up after update’ issue persists after trying all the possible fixes? Then, you must reach out to the support team without further delay. Alternatively, you can also approach a reputable iPhone Repair service for an affordable solution.